Roller Shutter Locks

Features

The Rivers Roller Shutter Lock is a high security locking system for aluminium or steel roller shutters. The lock replaces the standard roller shutter bottom rail and incorporates two, three or four 40mm x 8mm locking bars. At a minimum, two lock bars engage into the roller shutter guide tracks. For additional security, further locking bars can be optioned which lock into heavy duty receiving cups anchored into the floor. The proprietary Rivers key drive lock handle is supplied as standard.

The Bottom Rail Lock is made to order based on the ‘overall clip length’ or ‘overall wind lock length’ of the roller shutter.

Rivers bottom rail locks are recommended for use with Austral Monsoon “H11” Guardian Security Steel Roller Shutters. Rivers can  supply and install a complete security roller shutter and bottom rail lock package.

Applications

Rivers Roller Shutter locks are used in government buildings, council amenities buildings, factories, warehouses, shopping centres or any commercial & industrial premises. These locks are ideal for use on any steel or aluminium roller shutter that may be a target for vandalism or forced entry.  The Rivers Roller Shutter Lock provides substantial improvement over other roller shutter locking methods.

Hardware

Hardware includes proprietary Rivers key drive lock handle which drives a rack and pinion mechanism to operate the lock bars.  When the Rivers Roller Shutter Lock is used on electrically operated roller shutters a micro switch must be fitted to deactivate the motor drive when the lock is in the “closed” position.

Finishes

The Rivers Roller Shutter Lock comes finished in a grey zinc rich primer as standard. Durable polyester powder coat can also be applied in any standard Dulux colour. Special colours are available upon request.

Installation

Rivers can fabricate the Roller Shutter Lock complete with joining slat and ship as one unit for site installation.  This eliminates the need to transport the existing bottom rail for conversion thereby maintaining security.  The Roller Shutter Lock slides onto the bottom slat of the roller shutter “Curtain”.  Floor cups are provided where required and must be recessed and securely fixed into the floor.  Rivers can provide experienced installers to correctly fit roller shutters and bottom rail locks ensuring security and reliable service.

Bottom rail lock options

LENGTH OF BOTTOM RAIL

RECOMMENDED LOCKING POINTS

INTERNAL OR EXTERNAL KEY ACCESS

ADDITIONAL LOCKING POINTS AVAILABLE

UP TO 2400mm

2

X

X

2401 – 3000mm

2

X

X

3001 – 3600mm

3

X

X

3601 – 4200mm

3

X

X

4201 – 4800mm

3

X

X

4801 – 5500mm

4

X

X

5501 – 6100mm

4

X

X

6101mm & OVER

4

X

X

Technical information:

Roller Shutter Locks

Order Detail Sheet – Roller Shutter Bottom Rail Lock